HP SCANJET 4200C LINUX DRIVER

For the HP ScanJet Plus the special device name must be the device that corresponds to the parallel interface card that was shipped with the scanner. A special driver is required for this card. Everything I know is shown in this page. Most of these models are supported by the HP OfficeJet Linux driver project sponsored by HP for printing, scanning, and photo-card access. I've been searching for two weeks now; and I can't get much help at all. However any information that could be used to expand the scope and accuracy of this page will be greatly appreciated.

Uploader:	Kalkis
Date Added:	5 May 2017
File Size:	54.9 Mb
Operating Systems:	Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads:	23531
Price:	Free* [*Free Regsitration Required]

All material is Copyright Jonathan Buzzard. You need to use a 2.

February 08, This scanner is a LMx derivative. If you'd like to contribute content, let us know.

Can't set up scanner HP scanjet c (solved)

However a firmware download is necessary before the scanner can be used. Sorry if I cant help you any further. Otherwise it is assumed that the scanner is connected by USB. Hi, I need a driver for linux for my scanner Hp ScanJet C, Mandrake has apparently the driver but it can't find it automaticaly, I tryed every usb port and checked with Kooka for any response.

More information can be had directly from the Plustek Scanner Driver for Linux homepage. Introduction to Linux - A Hands on Guide This guide was created as an overview of the Linux Operating System, geared toward new users as an exploration tour and getting started guide, with exercises at the end of each chapter.

There is direct support for these scanners from Epson from here http: Now I try here Or are based on the National Semiconductors LMx series of scanjte.

HP Scanjet 4200C Driver

But if your SCSI device name contains "usb", "uscanner" or "ugen", option np must be specified. This scanner uses the GT scanner chip from Grantech. Maybe it is sufficient to press 'scan' without 'change document' for repeated scans.

This is the default. Work is been done to provide a backend for this scanner by reverse engineering USB logs of the scanner under action in Windows. You didn't specified which distro you are using, but maybe modern versions of any distribution should solve this problem. If this variable is not set, the configuration file is searched in two default directories: It would therefore appear likely that the X12 would work in a similar fashion but this has not been confirmed.

Please visit this page to clear all LQ-related cookies. Hi, thanks to everyone who has tried to help but this was definitely a hardware problem. If you can't find your scanner here, then it means that I don't know. Click Here to receive this Complete Guide absolutely free. Everything I know is shown in this page. This list is by no means complete or necessarily accurate.

If the special device name contains "usb", "uscanner" or "ugen", it is assumed that the scanner is connected by USB.

Ubuntu Manpage: sane-hp - SANE backend for HP ScanJet scanners

It is very unlikely that the models listed will be supported. Setting a window to scan from ADF is not supported with xscanimage 1. This scanner uses the E5 chipset as is unsupported at this point in time.

The scanner is based on the Grandtech GT chip. They are supported by the Plustek backend. This book contains many real life examples derived from the author's experience as a Linux system and network administrator, trainer and consultant.

Option connect-device specifies that the scanner is connected to the system by a special device. More details and downloads can be seen here.